Industrial Products > Compressed Air Treatment > Oil Water Separators

Oil/Water Separators

The Eliminator II from Gardner Denver:

• Gravity flow system
• The Eliminator II oil water separator is designed and rated for real life summertime conditions (90°F 90%RH)
• Reduced maintenance, 40% longer service life
• Pop up indicator stores evidence of restricted flow conditions until manually reset
• Unique pre absorption filter, breaks contaminate formed emulsions
• The Eliminator II oil water separator is not recommended for use with emulsifying lubricant such as Polyglycol ATF or motor oil lubricants with heavy additive packages

PDF Downloads Eliminator II brochure PDF files will open in a new browser window.

The PURO from Jorc:

The PURO is designed to separate oil from condensate, that is extracted from compressed air systems. The PURO condensate separator covers compressor capacities up to 8m/min (300 cfm). Polypropylene has the perfect effect on oil. It attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO's efficiency toclean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm. All PURO models can accept condensate discharge from intelligent drains, timer drains, float drains and manual drains. Additional condensate can also be manually added.

Features:

• No de-rating or over-sizing (no complicated sizing charts required)
• Will handle and separate mineral oil, synthetic oil and stabile emulsions
• Is applied on capacity of compressed air systems up to 8m/min (300 cfm)
• Does not incorporate/require a condensate settling tank
• TEST valve for sampling purposes
• Simple to install
• Easy to maintain
• Rugged PE housing
• Small compact design
• Can be shipped via UPS

The PURO Grand from Jorc:

The Grand is designed to separate oil from condensate, that is extracted from compressed air systems. The Grand condensate separator covers compressor capacities up to 35m3/min (1250 cfm). Polypropylene has the perfect effect on oil. It attracts oil andcaptures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO's efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm.

Features:

• No de-rating or over-sizing (no complicated sizing charts required)
• Will handle and separate mineral oil, synthetic oil and stabile emulsions
• Is applied on capacity of compressed air systems up to 35m3/min (1250 cfm)
• Does not incorporate/require a condensate settling tank
• TEST valve for sampling purposes
• Simple to install
• Easy to maintain
• Rugged PE housing
• Small compact design
• Can be shipped via UPS